Garage Door Spring Replacement Cost in Phoenix
Published figures disagree because they measure different things. One national guide puts a typical replacement at about $250, within a $150 to $350 range.[2] Another lists $150 to $400 per spring installed, and its Arizona estimate runs from $158 to $376.[3]
Some pages quote parts only, some quote per spring, and some quote the whole visit.
Phoenix-area garage door companies' own websites, checked October 2026, show a similar spread. One lists spring replacement with standard 20,000-cycle springs at $355. Another prices torsion replacement for both springs at $395, and a third lists high-cycle 80,000-cycle springs at $425.
Think of the price as a sum: spring, labor, hardware, extras. If a spring has already snapped, start with broken garage door spring signs and next steps, then come back to compare quotes.
What Appears on a Spring Replacement Quote
Start with the parts. A quote should say whether it covers a single spring or a matched pair, and whether cables or bearings are included.
Labor comes next, often with a separate service or trip fee. Among Phoenix-area company sites checked, most list diagnostic or service-call fees from $0 to $150. A couple say the fee is waived or credited when you approve the repair.
Night and weekend calls often add a surcharge, so ask about it up front, especially if you're calling for emergency garage door repair.
Extras are where quotes balloon. Ask for photos of anything worn before you approve it.
Pro tip
Ask whether the price is per spring or for the pair, and get the cycle rating in writing, so quotes compare fairly.
| Quote line | What it covers | What changes it | What to ask |
|---|---|---|---|
| Spring(s) | The spring itself, torsion or extension | Wire size, length, cycle rating, one spring or two | Is this price per spring or for the pair? What is the cycle rating? |
| Labor | Removing the old spring, installing the new one, balancing the door | Door weight, system type, job complexity | Is adjustment included, and what does the workmanship warranty cover? |
| Service or trip fee | Getting a technician to your door | Distance, time of day, whether it is credited to the job | Is it waived or credited if I approve the work? |
| Hardware (cables, bearings, brackets) | Parts that wear alongside the spring | Visible wear or damage | Can you show me the worn part before replacing it? |
| After-hours surcharge | Night, weekend or same-day premium | Time of call, urgency | What is the surcharge, and can the visit wait until morning? |
| Add-ons (tune-up, rollers) | Optional work bundled into the visit | Age and condition of the door | Is this needed now, and is it itemized separately? |
For any job near or above $1,000 in labor and materials, Arizona law expects a written contract with the license number, work description, total price and payment terms. Check the contractor on the ROC Contractor Search, and confirm the license is current and the class covers the work.
Torsion vs Extension Spring Cost
A torsion spring mounts on a bar above the door and twists to lift it. Extension springs run along the horizontal tracks and stretch.
Professional torsion replacement typically costs more, about $200 to $350 against $150 to $200 for extension springs.[2] Phoenix company sites show overlapping bands, $199 to $599 for torsion and $179 to $599 for extension.
Price range
Phoenix company site prices by spring type
| Item | Low | High |
|---|---|---|
| Torsion | $199 | $599 |
| Extension | $179 | $599 |
Spring life depends on handling, installation, usage and environment, and a spring's cycle life may not match the door's.[1] For lifespan and cycle ratings, see how long garage door springs last.
How Door Weight and Spring Size Change the Price
Springs are matched to door weight, height and drum size. A heavy insulated or wood door needs a different spring than a light steel one.
Ask the installer to weigh the door or measure the wire on the old spring. A wrong size leaves the door unbalanced and strains the opener.
Ask for the spring specification in writing: type, dimensions, wire size, count and cycle rating. For one covered application, DASMA's standard calls for springs designed for a minimum of 10,000 operating cycles.[4]
Dealer badges on a website or quote show a manufacturer relationship, not an ROC license. Confirm the license first.
If you're weighing a do-it-yourself job, read DIY vs Professional Garage Door Spring Replacement. For the service itself, see garage door spring repair and replacement.
Quick answers
Is the quoted price per spring or for the pair?
It varies by company. One national source lists $150 to $400 per spring installed, so ask which one a quote covers.
Does a service fee always apply?
Most Phoenix-area company sites list diagnostic or service-call fees from $0 to $150, and a couple waive or credit it when you approve the repair.
Related questions
Questions
- Door & Access Systems Manufacturers Association International (DASMA). "Factors Affecting Spring Cycle Life." https://www.dasma.com/wp-content/uploads/pubs/TechDataSheets/CommercialResidential/TDS190.pdf. Accessed October 17, 2026.
- The Spruce. "Garage Door Spring Replacement Costs: What to Know." https://www.thespruce.com/garage-door-spring-replacement-8635322. Accessed October 17, 2026.
- CostPatch. "Garage Door Spring Replacement Cost (2026 Guide)." https://costpatch.com/garage-door-spring-replacement/. Accessed October 17, 2026.
- Door & Access Systems Manufacturers Association International (DASMA). "Wind Load Testing - Garage Doors." https://www.dasma.com/wp-content/uploads/2025/02/DASMA-208-2018.pdf. Accessed October 17, 2026.
