Garage Door Spring Repair and Replacement

Signs Your Garage Door Spring Needs Attention

Springs counterbalance the door's weight so it lifts smoothly. This service replaces worn or broken torsion and extension springs on residential doors.

Can a garage door spring be repaired? Not in the usual sense. A failed spring is normally replaced, and a technician typically checks the cables, rollers and door balance during the same visit.

Torsion and extension springs

Torsion springs sit in a coil on a bar above the door. Extension springs run along the horizontal tracks.

Torsion vs extension springs shows how to tell them apart by sight.

What failure looks like

• A sudden, loud snapping sound from the garage^[1]
• A door that won't lift, or sits crooked^[1]
• A visible gap in the coil, or springs stretched out instead of tightly wound^[1]
• An opener that runs while the door barely moves

Sound familiar? The door felt heavier for weeks. You kept using it. Now it won't move at all.

Age and daily use matter, and how long garage door springs last explains cycle ratings. Waiting rarely helps. A worn spring puts extra strain on the opener, cables and panels.

Never force a stuck door up by hand, whether you're in Mesa or Peoria.

The stored energy in the spring is why this is a trained-technician job. What to do about a broken garage door spring covers the safe next steps.

Spring Replacement Cost in Phoenix: The Short Version

Price is driven by spring type, single versus double spring, door weight, parts and labor. Spring replacement cost in Phoenix reads an estimate line by line.

The figures below come from Phoenix-area garage door companies' own websites, checked October 2026. They are general guidance printed by individual companies, not quotes.

Some listings say the service-call fee is waived or credited when you approve the repair. A national home-improvement outlet notes a professional may charge upwards of $300 for a spring replacement, with cost varying by spring size and type.^[1]

Price range

Printed spring replacement ranges

• Torsion spring replacement$199–$599

• Extension spring replacement$179–$599

• Service-call fee$0–$200

$0$200$400$600

Printed spring replacement ranges

Item	Low	High
Torsion spring replacement	$199	$599
Extension spring replacement	$179	$599
Service-call fee	$0	$200

A higher cycle rating costs more up front. Ask what rating each quote includes.

Price factors

What moves the price

• 01

  Spring type

  Torsion and extension springs have different printed ranges

• 02

  Cycle rating

  80,000-cycle springs cost $425 versus $355 for 20,000-cycle

• 03

  One spring or two

  Replacing both torsion springs is listed at $395

• 04

  Worn parts

  Cables or rollers found worn add to the job

Get an itemized written quote from each business.

Comparing quotes is the only way to see whether a low number leaves out parts, a second spring or the rebalance.

What Happens During a Spring Replacement Visit

Most visits in Gilbert, Chandler or Scottsdale follow the same order.

Step by step

How a spring replacement visit runs

1. 1

   Inspect

   The technician confirms the failed spring and its type.

2. 2

   Quote in writing

   You see the price before work starts.

3. 3

   Secure the door

   The door is held so nothing moves while tension is released.

4. 4

   Remove the old spring

   This is the stored-energy step.

5. 5

   Fit the new spring

   It should be sized for your door.

6. 6

   Rebalance and test

   The door should lift smoothly and stay put midway.

1. Inspect. The technician confirms the failed spring and identifies its type.
2. Quote in writing. You see the price before work starts.
3. Secure the door. The door is held in place so nothing moves while tension is released.
4. Remove the old spring. This is the stored-energy step.
5. Fit the new spring. It should be sized for your door.
6. Rebalance and test. The door should lift smoothly and stay put when stopped midway.

Cables, rollers and balance are commonly checked at the same visit.

Questions to ask

• Is the replacement spring matched to my door's weight?
• On a two-spring door, will both springs be replaced?
• Is same-day or emergency service available, and does it change the price?
• Does my city require a permit, and who would pull it?

For jobs over $1,000, Arizona law requires a written contract that includes specific information.^[2] That includes the license number, a work description, the total price, any deposit and the payment schedule, plus ROC contact details.

Many spring jobs fall below that line, so ask for a written quote regardless.

How to Verify an Arizona ROC License Before You Hire

Checking takes a few minutes and happens before any deposit.

1. Search the business name or 6-digit license number in the ROC Contractor Search.
2. Confirm the license is current.
3. Check that the license class is plausible for the work in your contract.
4. Call the number on the license record to confirm the person you're dealing with represents that licensee.

The class question

Classes that may appear include R-60 or CR-60 Finish Carpentry, R-61, R-62, R-11 or CR-11 Electrical, B General Residential and KB-2. The ROC residential class rules name no garage door class. Confirm on the ROC lookup that the listed class fits your contract.

When a license matters

Arizona exempts certain minor work only when the total contract price, including labor and materials, is under $1,000.^[2] A "handyman" advertisement is a flag on larger jobs.

Arizona ROC license for garage door companies explains the details.

Residential Contractors' Recovery Fund claims depend on the contractor having been properly licensed. That's a concrete reason to check before you pay.

Insurance and badges

Ask for a workers' compensation certificate and, separately, proof of general liability. A snapped cable or falling door can damage a vehicle.

Manufacturer dealer badges are not licenses. IDEA accreditation is voluntary, and doors.org/find-a-qualified-professional lets you check claims.

Run a few Peoria, Surprise or Buckeye businesses through these steps, and compare their written quotes side by side below.

Checklist

Questions to ask before you hire

0 of 7 ticked

• Is the license current on the ROC Contractor Search?
• Does the listed license class fit the work in my contract?
• Does the phone number on the license record reach this business?
• Is the total contract price under $1,000, or is a license required?
• Can they show a workers' compensation certificate?
• Can they show separate proof of general liability?
• Is a dealer badge being offered in place of a license?

Tick them off as you go. Nothing is saved or sent.